Pulsar FPV 3.0 Glider

Pulsar FPV 3.0 Glider

Pulsar
$1,551.35
(No reviews yet)
Weight:
60.00 LBS
Width:
200.00 (cm)
Height:
50.00 (cm)
Depth:
20.00 (cm)
Current Stock:
Adding to cart… The item has been added
Description
 
icon
Wingspan:
117.75" (2990mm)
icon
Length:
62" (1270mm)
icon
Weight:
67-70 oz. (1895-1980g
icon
Channels:
4,6
icon
Good: MVVS 4.6/840, 13x10 folding
Better: MVVS 5.6/690, 15x10 folding
TP2700/5000 3S/4S
40mm spinner
The Pulsar 3E Pro FPV is the latest addition to the ever-growing Pulsar family of hand-made electric sailplanes. Built at our request, this model is designed to hold a payload and still give you Pulsar performance. The Pulsar 3E Pro FPV model uses the same AG25 modified airfoil designed by Dr. Mark Drela as the other 3m and larger Pulsars. Just like its smaller cousins, the entire model is constructed using free-flight techniques. The wing is a balsa built-up Carbon Fiber and Kevlar D-box design that utilizes carbon fiber faced balsa ribs and carbon fiber trailing edge. The open section of the wing, as well as the tail parts, are covered with UltraCote. The fuselage is made of gel-coated 2.4GHz friendly fiberglass/Kevlar with a carbon fiber tapered boom and removable fiberglass/Kevlar nosecone. The three piece wing and double boom conventional tail are each easily removable for transport and storage. The servos for the rudders and elevator servos install in the vertical fins. The careful use of composites, combined with an underlying wood structure in the wing, ensures a good light structure that will hold its shape for a long time. This is an extremely light, high performance model. 

Virtually perfect, very well made and extremely clean. One of the most advanced addition to the ever-growing Pulsar family of hand-made electric sailplanes. 
 
Special Features:
- Control Surfaces: Ailerons, Elevator, Rudder and Flaps
- Kevlar/Fiberglass 2.4GHz FPV friendly pod with removable nose cone
- Tight covering, with all seams hand-sealed
- high volume, gel-coated Fiberglass/Kevlar pod with CF tapered boom
- Highly efficient pylon mounted wing
- Ready-built Balsa/CF/Kevlar D-tube 3-piece PLUG-IN wing design
- Transparent Ultracote covered wings and tail parts
- Includes hardware
- Virtually perfect, extremely clean and well made 

More Information (links): 
* Building Pictures and Details
Airfoil 
Wing area 
Wing loading 
Empty weight 
: AG 25 mod.
: 1070 sq.in. (69 sg.dm)
: 9-9.5 oz/sq.ft. (27.5-29 g/sg.dm)
: 41 oz. (1150g)
 
Suggested Equipment (Sport 3S)
(1) MVVS 4.6/840
(1) Jeti Spin Pro 66 ESC
(1) TP2700 3S battery
(4) HS-5085MG servo (ailerons, flaps)
(1) HS-5125MG servo (elevator)
(2) MKS Ds6100 servo (rudder)
(4) Servo frame Hitec HS-5085BB/85MG
(2) Servo frame MKS Ds6100 
(1) Aeronaut turbo 40/5/8mm folding spinner
(1) Aeronaut yoke 42/8mm
(1) Aeronaut blade stopper
(1) Aeronaut 13x10 folding propeller
(1) Deans connector
(3) 36" Servo extension
(2) 24" Servo extension
(3) 12" Servo extension
(7) 6" Servo extension
(2) 3" Servo extension
(1) Velcro strap for folding propeller

Suggested Equipment (Power 4S): 
(1) MVVS 5.6/690
(1) Jeti Spin Pro 80 ESC
(1) TP5000 4S battery
(1) Aeronaut turbo 40/5/8mm folding spinner
(1) Aeronaut yoke 42/8mm
(1) Aeronaut blade stopper
(1) Aeronaut 15x10 folding propeller