3DHS 104" AJ Slick - Orange

(2 reviews) Write a Review
120.00 LBS
232.00 (cm)
50.00 (cm)
42.00 (cm)
Fixed Shipping Cost:
Current Stock:

Out of stock

Out of Stock

104" AJ Slick


Andrew Jesky is one of the top RC aerobatics pilots in the world today. His long list of achievements in Pattern, IMAC, and indoor was crowned in 2010 with the USA National championship in F3a pattern. For the 35% size of IMAC/3D/sport aircraft, Andrew has designed the 104" AJ Slick 540.

The 104" is a no-compromises balsa/ply ARF aircraft. Because it is intended to be a true dual-purpose IMAC and 3D machine, this aircraft includes 2 sets of horizontal stabs/elevators. One set is optimized for 3D flight, the other for IMAC competition. Its design gives truly precise performance with excellent tracking and extremely crisp, accurate snaps, while its low weight and carefully chosen airfoil package give perfect 3D performance. The highly refined aerodynamic design gives very low knife-edge coupling, which needs little or no mixing.

The included parts and features provide extreme performance and real value: carbon landing gear included carbon spinner carbon tailwheel carbon wing tube dual carbon stab tubes sewn cloth wing and stab bags Genuine Ultracote 2 piece cowl pre-finished canopy hatch with tinted canopy aluminum braced motor box with pre-installed firewall 4-40 ball link hardware phenolic horns pre-hinged wings and stabs aluminum wheel hubs removable rudder

The 104" Slick uses a variety of 100-120CC twin cylinder engines such as the DA-100 and DLE-111, but is configured to also easily fit the awesome DA-120CC engine. A tunnel is built in to accommodate tuned pipes or MTW TD-75 dual canisters. Recommended headers are 70mm drop flex style.
The recommended servo setup for the 104" Slick is QTY 8 high-torque metal-gear servos such as the hitec HS-7955TG or HS-7954SH, or the Futaba S9156 or S9157, plus one throttle servo. Recommended servo arms are SWB 2" single sided on all servos for a typical setup, although if a more nose-heavy CG is desired, the rudder servos may be mounted in a pull-pull arrangement using a 4" double arm.

To make transportation easier, the 104" Slick includes a removeable rudder. The height of the rudder when installed is 28". The height of the canopy when the airplane is resting on the ground is 26". See the "Tech Specs" tab below for more dimensions.




Wingspan: 104"

Length: 96"

Wing Area: 2100 sq.in.

Weight (RTF): 25-28 lbs.


Recommended Components

Engine: 100-120cc

Motor: Hacker A100-8

ESC: Castle Creations ICE-HV 160A Servos: Hitec HS-7955TG Battery: Thunder Power 12S 10000mAh LiPo


Alternate Components

Engine: Desert Aircraft DA-120cc

Servos: Hitec HS-7950TG


Required to Complete

All Electronics (See Recommended Components)


2x 48" Heavy Duty

2x 24" Heavy Duty

1x 18" Heavy Duty

2x 12" Heavy Duty



Hardware: 5-8x 2" Servo Arms

0-1x 4" Double-Side Servo Arm

Mejzlick 27x12 Carbon Propeller or Mejzlick 28x12 Carbon Propeller

Adhesives: Thin CA 5-30min Epoxy or Gorilla Glue


 click here for MANUAL


Customer Reviews
  This is my first 3dhs airframe. I am very happy with it. Fly's like a dream. Looks sharp sitting next to all the other big birds. Ailerons are nice and stiff, solid construction all around. Customer support is top of the line. Reward points are the bomb! I will be back for more.
  Reviewed by:  gary parsons from GARDEN GROVE CA. on 1/3/2012
104 Slick Review
  I've owned MANY 3dhs planes and this one stands out as the most comfortable and confidence-inspiring plane I've ever flown. Having only had the plane in the air for 3 weeks or so, I am already convinced it is my favorite plane. A few days of working with this plane has improved my skills across the board with my others as well. Excellent combination with a DA120!! Highly Recommended!!
  Reviewed by:  Mike Bivens from Knoxville, TN. on 6/22/2011
Joe's Mom flew it and said this is cool
  At the Tennessee Huck fest, Arron and Joe put the 104 on a buddy Box and let Becky and others fly the 104. Becky jumped at the chance to fly such a great plane. Everyone that flew it, were really impressed with the handling and tracking, and the 3D capabilities. A true winner.
  Reviewed by:  James Smith from Fort Wayne. on 3/21/2011


  • 4
    Slick 540

    Posted by Mike Jones on 18th Mar 2014

    This is my first 3dhs plane. very nice! Fit and finish is beautiful. I have just got it together. Now I need some nice weather to try it out.

  • 5
    104' AJ Slick

    Posted by Fred Champagne on 27th Aug 2013

    I have flown many brands In the 100cc size and this plane blows them all away. Rock solid in every maneuver. Very big yet light for a plane in this category. After flying the slick, I am starting to replace all of my planes in all sizes with 3DHS planes.