Sale

Graupner MC-20 12 Channel 2.4GHz HoTT Transmitter ( DEMO)

SKU:
33020
$503.87 $301.72
$503.87
(You save $202.15 )
(No reviews yet)
Weight:
10.00 LBS
Width:
30.00 (cm)
Height:
20.00 (cm)
Depth:
15.00 (cm)
Current Stock:

Out of stock

Out of Stock

Overview 

  MC-20 is Hand-held, tray-type transmitter with 12 controls functions and a new internal patch aerial. MC-20 HoTT transmitter enables advanced RC model builders to control nearly any model. The use of the Graupner HoTT 2.4 GHz transmission technology ensures high functional reliability through bidirectional communication between sender and receiver, with integrated telemetry, voice output via speaker or headphone output, and ultra-fast controller response times. The transmitter has a 24-model memories and features simple programming setup with capacitative touch keys.  Two high-contrast, 8-line blue-lit graphical displays ensure a perfect display of all parameter settings and telemetry data. It is possible to store telemetry data and expand the model memories on a micro-SD memory card. USB  connector for readout and storage of model memories and for firmware upgrades.

Key Features

  • FHSS, frequency hopping via up to 75 channels
  • Range test and warning function
  • Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
  • Numerous failsafe functions
  • Integrated telemetry display with 8 x 21 characters/ 128 x 64 pixels
  • Micro-SD card slot for storage of telemetry data, similar to a black box and to add model memories, 
    MP3 player, and for firmware updates
 
  • Wireless teacher/pupil function 
  • Binding of any number of receivers for channel expansion (maximum of 16 channels) The last receiver bound
    sends the telemetry data.
 
  • Future-proof thanks to the update capability via USB interface or Micro SD-card
  • Integrated Graupner/SJ HoTT 2.4 GHz transmission system
  • Patch aerial
  • Wireless L/S function
  • Storage of telemetry data with date and time
  • Servo cycle times of 10 ms can be selected for digital servos.
  • Ultrafast response times through direct transmission of the data from 32 bit main processor to the 2.4-GHz
    transceiver

  • Operation and programming based on the proven concepts of the mx-24
  • A contrast-rich, blue-lit graphic display ensures perfect control of settings and parameters 
  • 12 control functions
  • Free assignment of all switches
  • 24 model memories
  • 10 switches/keys
    (2 3-stage-switches long, 4 2-stage-switches, 2 switches long, 2 switches,
 2 sliders/2 rotary controls )
  • Mode 1 to 4 freely selectable
  • CAP-TOUCH key with key lock function to prevent unintentional operation
  • Numerous telemetry, programming, and analysis functions right in the transmitter display
  • Voice output can be called up via freely programmable switches
  • Extensive program for fixed-wing and helicopter models
  • Swashplate limiter
  • Switch »Monitor« to control all switches and control switches
  • Freely programmable 12 mixers for fixed-wing models and helicopters
  • 7 flight phase programs can be adjusted individually for each model and assigned names
  • SUPER-SERVO menu with a perfect overview of all servo setting data and simple correction of
    parameters for 4 levels
  • SUPER-DUAL-RATE, EXPO, and EXPO/DUAL-RATE menu with 36 possible setting variants
  • Practical, optimized multi-function menus for fixed-wing and helicopter models.
  • Helicopter swashplate mixer for 1, 2, 3, or 4-point linkage.
  • Failsafe monitor for 12 servo functions
  • Convenient timer menu (Stopwatch system, alarm timer, countdown timer, lap counter, et cetera)
  • Stopwatch with history
  • Transmitter operating time timer is automatically set to zero by the transmitter battery charging process.
  • Switch assignment of the flight phase switches
  • Linearization of swashplate servos:
  • Tailplane type normal, V-tail, Delta/flying wing. 2 elevator servos 3+8 (as a result 2 linkable elevator
    servos are immediately available without wasting free mixers/dual-mixers)
  • Number of flaps 4 ailerons / 4 cambered flaps: Full support for 8 control surface servos, now without wasting 
    free mixers.

  • Switch-off capability for flight phase transition delay
  • 16 Phase names, Fixed-wing mixer, Number of flight phases, Phase trim, Switchable Snap-Flap, 3 Ring limiter
  • Channel sequencer, Logical switches, Trim memory, Multi-channel functions, Music player and internal speaker
  • Servo assignment swap at the receiver output of the transmitter and receiver
  • PPM signal can be set at data output
  • Model memories of the mx-20 can also be loaded directly into the mc-20. 

 
Includes

  MC-20
  6000 mAh LiPo battery
  HoTT GR-24L receiver
  HoTT GR-12L receiver
  500 mA transmitter battery charger
  Update cable
  Micro SD card
  Aluminum case
  Hand rests
  Neck strap
  short and long joystick
  transmitter strap
  Manual
  
Graupner HoTT Features 

  • Simple, extremely fast binding
  • Range test and warning function
  • Low-voltage warning
  • Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
  • Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed
    simply with HoTT Smart box or transmitter LCD

  • Binding of any number of receivers for channel expansion (max. of 32 channels)
  • Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms
    (only digital servos!)
  • Maximum immunity to interference through optimized frequency hopping and broad channel spread
  • Intelligent data transmission with correction function
  • Extremely fast rebinding, even at max. distance
  • Telemetry analysis in real time
  • Over 200 systems can be used simultaneously
  • Future-proof through update capability via USB interface or Micro SD card

 

Specifications

 

Dimensions (LxWxH)

235 (315) x 228 x 66 mm     9.25 (12.4) x 8.98 x 2.60 in

Operating voltage

3.4 ~ 6.0 V

Frequency

2400 ~ 2484,5 MHz

All-up weight, approx.

1400 g                       49.38 oz

Control function

12

Current Consumption

400 mA

Temperature range

-15 ~ 55 °C                -59 ~ 131°F

Antenna

Patch

 

 

Reviews 

Just received my MC-20 radio and an extra 8 channel receiver, very fast shipping, very well packed, the radio is the finest piece of equipment I have ever held, this is a precision instrument ! I started in R/C with a 5RS and Kraft equipment, then JR ever until now, I will never need another radio.......Bud Williams