EME 70 Engine

EME 70186
$820.00 $728.00
(You save $92.00 )
(2 reviews) Write a Review
19.00 LBS
30.00 (cm)
18.00 (cm)
25.00 (cm)
Current Stock:

EME 70 engines include: NSK bearings, Walbro Carb, Ported cylinder head design, Pre-installed throttle arm that is USABLE! with correct linkage geometry, Better reed block and intake design, Genuine RC EXL igniton


Walbro            Carb


NSK main            bearings


IKO rod            bearings


Rcexl HX            (12V) Ignition.


Only 250mm            Plug Cap to Plug Cap.


18 Month            warranty serviced right here by Pro-RC


18 month parts warranty on engines bought from Pro-RC

Shipping not included for Warranty. 


Displacement: 70 cc

Weight: 4.0 lbs on our scale: 5.97 lb. with Stock Mufflers and Ignition Engine -Engine - 1800g  Muffler - 165g Ignition - 190g


RPM Range:  1,200-7,500

Output: 7.1 hp @ 7,000 rpm

Requires: unleaded gasoline, oil, ignition battery & propeller

Includes:  Engine, Ignition, Mufflers, Spark Plugs, Exhaust Gaskets, Bolts, Standoffs, Manual, and Decals

Suggested Propellers: 23x10, 24x10, 24x12 (3-blade: 22x10, 22x12, 23x10) - Load for 6,100 to 7,100 RPM

Technical Data:

Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)

Compression Ratio: 7.6:1

Gas/Oil Mix: 30:1 ~ 35:11


  • 4
    New Engine to Run

    Posted by Rudie on 31st Mar 2019

    Bought my EME 60 2 summers ago and it started and ran great! I need an engine for my SU26 so back to RC-Pro for an EME and a 70cc twin! It will be flying in the spring!

  • 4

    Posted by MIke on 19th Feb 2015

    Engien is good so far and for build quality, was missing the muffler bolts in the box. Not a big deal was able to get some that worked no problem at LHS. The size of this engine is great for most 50-60cc planes. Fits in cowl no problem with no cutting at all except for exhaust pipe holes.