3DHS 42" AJ Slick - Red

SKU:
3DH-42SLICK-R
$198.45
(3 reviews) Write a Review
Weight:
20.00 LBS
Width:
99.00 (cm)
Height:
36.00 (cm)
Depth:
18.00 (cm)
Fixed Shipping Cost:
$35.00
Current Stock:

Out of stock

Out of Stock

updated version Now with new color schemes, carbon fiber landing gear mount, and one-piece heavy-duty carbon landing gear.


Based on the new, full-size aerobatic Slick 360/540 Andrew Jesky's 42" AJ Slick raises the bar for parkflyer precision/3D aircraft. Featuring all of the 3DHobbyShop construction innovations, like a pre-assembled heavy-duty motor box with pre-drilled and pre-nutted firewall, heavy-duty carbon wing spar, thumb-screw wing attachment, aluminum wheel axles and collars, latching canopy hatch with pre-installed canopy - the 42" Slick ARF will get you in the air quickly and easily. Removable wings make for easy transport while the stiff carbon wing tube withstands the very high G-loading of extreme aerobatics.


Andrew gave the Slick his personal airfoil design, which provides no-rock harrier performance AND great precision in snapping maneuvers. Stability, stability, stability is what the design provides, locking into knife-edge flight without any wandering and handling crosswind conditions better than you'll believe. All the much-loved characteristics of the 51", 71", and 89" AJ Slicks are here in this 42" version

.

.

Specs:
 

Wingspan: 42"

Length: 38"

Weight: 30-36oz

Wing Area: 375 sq in

 

Required Equipment
 

Motors:

Omega 103g 1030KV w/12 x 6 prop Recommended

Hacker A30-16M w/11 x 5.5 prop

Omega 72g 1100KV w/ 11 x 5.5 prop

 


ESC:

Hacker X40

Airboss 45

Castle Ice Lite 50


Battery:

3S Lipo 1500-2100mah


Servos:

Hitec HS-65MG Recommended

Hitec HS-65HB

Hitec HS-45HB
Servo extensions: 1 x 12" servo extensions 1 x 6" servo extension 2 x 4" servo extensions

Servo notes:
The HS-45HB is only for use with very light setups such as the 72g Omega or 480-sized outrunners. Being a very light servo, it requires perfect installation for best performance. The HS-65MG is a heavier, but much more rugged servo that is more forgiving of less-than-perfect installation.
Note:that the servo openings on the slick are sized to use either of these servos, so they will need slight trimming for perfect fit.

Click here for MANUAL

Reviews

  • 5
    42' slick

    Posted by Vince on 21st Mar 2015

    Awesome Plane with a the OSMG -9510 motor!!!...enough said
    ..:)

  • 5
    3DHS 42" Slick

    Posted by Ben on 23rd Jan 2015

    Top notch quality airfame! this is my first AJ Slick and plan to get the 89" or 104" in the future. first thing I noticed when unboxing is the light weight airframe parts and I can tell this slick will be floaty and great for 3d! love the flat bottom fuse as well for good harrier characteristics! looking forward to getting this one in the air:) boxed nicely and great service from Pro-Rc! I'm very happy to find a 3DHS dealer in Canada:)
    Set-up will be:
    Omega 103g Motor
    Castle Edge Lite 50ESC
    Hitec HS-65MG all around (pull pull for rudder)
    Graupner 12x6 E prop
    1.5" Plastic Spinner (may leave off)
    3s 1500-2200 Lipo
    Aurora RC Genesis lighting system
    and any light weight r/x I can find in the shop

  • 5
    very "slick"

    Posted by Mike on 22nd Apr 2013

    I have not flown this plane yet, but the build has gone very well. the fit and finish is next to perfect. if it flies as well as it has gone together I will be very happy. I can see this is going to be my first of many 3DHS planes

    thanks to pro-rc for making these planes available in Canada.