Sale

3DHS 74" Edge Demonstrator Scheme

SKU:
74demonstrator
$649.99 $629.99
$649.99
(You save $20.00 )
(No reviews yet)
Weight:
30.00 LBS
Fixed Shipping Cost:
$69.00
Current Stock:

Out of stock

Out of Stock

74" Demonstrator

 

Setup for video above: Hacker A50-12L motor on 8S 3850mah Lipo
The Edge uses 4 full size metal gear servos, plus a throttle servo if needed. A second elevator servo may also be installed to balance a very heavy gasoline engine. All ball-link hardware is included, along with carbon landing gear attached to a fiberglass/carbon reinforced plate, wing bags, genuine ultracote covering, carbon wing tube, locking hatch latch, carbon-reinforced fuselage, aluminum axles, carbon tail wheel, and more.
For gas power, the 74" Edge is set up for the DLE-30 engine, and includes a firewall-drilling template for that engine and uses the standoffs included with the latest version of the DLE-30 engine. If you are not using a DLE-30, you will have to supply the correct length standoffs and drill your firewall accordingly for your particular engine.
We recommend the DLE-30 Rear-Carb engine for this aircraft, with a 20x6 (or Vess 19A or 20A) prop.
The 74" Edge includes a generic fuel tank, but the American-made Fortitude Fuel Tank is the best in the world and is a highly recommended upgrade.
 
Center of Gravity range: 4.5" - 5.25", measured at the wing root.

 
Specs:

Wingspan: 74"

Length: 68"

Wing Area: 1000 Sq. Inches

Weight: 9.0-10.5 lbs.

 

Required Equipment

Engine: 25-35CC Gas (DLE-30 Recommended) 1.50-2.10 Glow (Mount not included in kit)

Gas Prop: 20x6 Xoar Sword Vess Aero 19A Vess Aero 20A

Fuel dot or Fuel filler Fuel line

Electric Motor:
Hacker A50-12L with 6S 5000-5800mah 19x10 or 20x10 prop

Hacker A50-14L with 8S 3500-4400mah 18x8 or 19x8 prop

Hacker A60-6XS with 6S 5000-5800 mAh 20x10 prop

Hacker A60-5S with 8S 4000-5000 mAh 20x10 prop


ESC: Castle ICE 100 Castle Phoenix HV-85 Hacker X75 OPTO ...with all of these, a Castle BEC PRO is recommended.


Servos:

QTY 4 Hitec HS-985MG (Good)

QTY 4 Hitec HS-7985MG (Better)

QTY 4 Hitec HS-7955TG (Best)

QTY 1 standard throttle servo if needed. NOTE: Mini-servos have a short life span as throttle servos in this application, use with caution.

CLICK HERE FOR EXTENSION PACK


Extensions: QTY 2 24" Elevator and Rudder QTY 2 12" Ailerons QTY 2 4-6" Ailerons (receiver side) QTY 1 18" Throttle servo


Spinner: 3.0"